Neighbor Allowas-In - Dell Z9500 Reference Manual

Defaults
•
•
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0

neighbor allowas-in

Set the number of times an AS number can occur in the AS path.
Z9500
Syntax
neighbor {ip-address | peer-group-name} allowas-in number
To return to the default value, use the no neighbor {ip-address | peer-
group-name} allowas-in command.
Parameters
ipv6-address
peer-group-
name
number
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Related bgp four-octet-as-support
Commands
Border Gateway Protocol
seconds = 5 seconds (internal peers)
seconds = 30 seconds (external peers)
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number of times to allow this neighbor ID to use the
AS path. The range is 1 to 10.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
– enables 4-Byte support for the BGP process.
511