Protocol Frrp - Dell Z9500 Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0

protocol frrp

Enter the Resilient Ring Protocol and designate a ring identification.
Z9500
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the no protocol frrp {ring-id} command.
Parameters
ring-id
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage This command places you into the resilient ring protocol. After executing this
Information command, the command line prompt changes to conf-frrp.
Force10 Resilient Ring Protocol (FRRP)
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Enter the ring identification number. The range is from 1 to
255.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced
759