Ipv6 Nd Dad Attempts; Ipv6 Nd Dns-Server - Dell Z9500 Reference Manual

Usage You can separately configure both IPv4 and IPv6 domain name servers.
Information

ipv6 nd dad attempts

To perform duplicate address detection (DAD) on the management interface, configure the number of
neighbor solicitation messages that are sent.
Z9500
Syntax
ipv6 nd dad attempts {number of attempts}
To restore the default value, use the no ipv6 nd dad attempts command.
Parameters
number of
attempts
Default 3 attempts
Command INTERFACE (management interface only)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0

ipv6 nd dns-server

Configures Recursive DNS Server (RDNSS) addresses to be distributed via IPv6 router advertisements to
an IPv6 device.
Syntax
ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}
IPv6 Basics
Enter the number of attempts to be made to detect a
duplicate address. The range is from 0 to 15. Setting the
value to 0 disables DAD on the interface.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
989