Maximum-Paths - Dell Z9500 Reference Manual

Version
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1

maximum-paths

Enable the software to forward packets over multiple paths.
Z9500
Syntax
maximum-paths number
To disable packet forwarding over multiple paths, use the no maximum-paths
command.
Parameters
number
Defaults 4
Command ROUTER OSPF for OSPFv2
Modes
ROUTER OSPFv3 for OSPFv3
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.1(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Specify the number of paths. The range for OSPFv2 is from 1
to 16. The default for OSPFv2 is 4 paths. The range for
OSPFv3 is from 1 to 64. The default for OSPFv3 is 8 paths.
Description
Introduced on the Z9500.
Introduced support for OSPFv3 on the S4810 and Z9000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
1249