Clear Ipv6 Mld_Host; Ipv6 Address - Dell Z9500 Reference Manual

clear ipv6 mld_host

Clear the IPv6 MLD host counters and reset the elapsed time.
Z9500
Syntax
clear ipv6 mld_host
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1

ipv6 address

Configure an IPv6 address to an interface.
Z9500
Syntax
ipv6 address {ipv6-address prefix-length}
To remove the IPv6 address, use the no ipv6 address {ipv6-address
prefix-length} command.
Parameters
ipv6-address
prefix-length
Defaults none
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
982
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
IPv6 Basics