Graceful-Restart Ietf - Dell Z9500 Reference Manual

Defaults No default password.
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
6.3.1.0
Usage The domain password is inserted in Level 2 link state PDUs (LSPs), complete
Information sequence number PDUs (CSNPs), and partial sequence number PDUs (PSNPs).
Related
•
Commands
•

graceful-restart ietf

Enable graceful restart on an IS-IS router.
Z9500
Syntax
graceful-restart ietf
To return to the default, use the no graceful-restart ietf command.
Parameters
ietf
Defaults Graceful restart disabled.
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1042
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
area-password — configures an IS-IS area authentication password.
isis priority — configures the authentication password for an interface.
Enter ietf to enable graceful restart on the IS-IS router.
Intermediate System to Intermediate System (IS-IS)