Show Ipv6 Pim Tib - Dell Z9500 Reference Manual

Group(s): ff00::/8, Static
Dell#

show ipv6 pim tib

View the IPv6 PIM multicast-routing database (tree information base — tib).
Z9500
Syntax
show ipv6 pim tib [group-address [source-address]]
Parameters
group-address
source-address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
9.0(1.3)
8.3.19.0
8.3.12.0
7.4.1.0
Example
Dell#show ipv6 pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P -
Pruned,
Join SPT,
Advertisement
1378
RP: 14::2, v2
(OPTIONAL) Enter the multicast group address in the
x:x:x:x::x format to view RP mappings for a specific group.
(OPTIONAL) Enter the source address in the x:x:x:x::x format.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S5000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced
R - RP-bit set, F - Register flag, T - SPT-bit set, J -
M - MSDP created entry, A - Candidate for MSDP
K - Ack-Pending State
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
PIM-Sparse Mode (PIM-SM)