Redistribute - Dell Z9500 Reference Manual

On configuring suppression using the passive-interface command, the state of the
OSPF neighbor does not change to INIT; instead, the state of the OSPF neighbor
changes to DOWN after the dead-timer expires.

redistribute

Redistribute into OSPFv3.
Z9500
Syntax
redistribute {bgp as number}{connected | static}[metric metric-
value | metric-type type-value] [route-map map-name] [tag tag-
value]
To disable redistribution, use the no redistribute {connected | static}
command.
Parameters
bgp as number
connected
static
metric metric-
value
metric-type
type-value
route-map
map-name
Open Shortest Path First (OSPFv2 and OSPFv3)
Enter the keyword bgp then the autonomous system
number.
The range is from 1 to 65535.
Enter the keyword connected to redistribute routes from
physically connected interfaces.
Enter the keyword static to redistribute manually
configured routes.
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
(OPTIONAL) Enter the keywords metric-type then the
OSPFv3 link state type of 1 or 2 for default routes. The values
are:
• 1 for a type 1 external route
• 2 for a type 2 external route
The default is 2.
(OPTIONAL) Enter the keywords route-map then the name
of an established route map. If the route map is not
configured, the default is deny (to drop all routes).
1319