Ip Extcommunity-List; Match Extcommunity - Dell Z9500 Reference Manual

ip extcommunity-list

To enter the Extended Community-list mode, use this feature.
Z9500
Syntax
ip extcommunity-list word
To exit from this mode, use the exit command.
Parameters
word
Defaults none
Command CONFIGURATION (conf-ext-community-list)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
7.8.1.0
7.7.1.0
7.6.1.0
Usage This mode changes the prompt.
Information
Example
Dell(conf)#ip extcommunity-list test
Dell(conf-ext-community-list)#

match extcommunity

To match an extended community in the Route Map mode, use this feature.
Z9500
Syntax
match extcommunity {extended community list name}
To change the match, use the no match extcommunity {extended
community list name} command.
Parameters
extended
community list
name
468
Enter a community list name (maximum 16 characters).
Description
Introduced on the Z9500.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the name of the extended community list.
Border Gateway Protocol