Show Ipv6 Ospf Neighbor - Dell Z9500 Reference Manual

Type-7 LSA count
Intra Area Pfx LSA Count
Intra Area TE LSA Count
Area 1 database summary
Type
Brd Rtr Count
AS Bdr Rtr Count
LSA count
Rtr LSA Count
Net LSA Count
Inter Area Pfx LSA Count
Inter Area Rtr LSA Count
Group Mem LSA Count
Type-7 LSA count
Intra Area Pfx LSA Count
Intra Area TE LSA Count
E1200-T2C2#sh ipv6 ospf neighbor
Neighbor ID
ID
Interface
63.114.8.36

show ipv6 ospf neighbor

Display the OSPF neighbor information on a per-interface basis.
Z9500
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] neighbor
[interface]
Parameters
process-
number
vrf vrf-name
interface
Open Shortest Path First (OSPFv2 and OSPFv3)
0
2
2
Count/Status
1
1
8
1
0
5
0
0
0
2
2
Pri State
1 FULL/DR
Enter the OSPF process number.
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to display OSPF neighbors corresponding to that
VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are displayed.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Dead Time Interface
00:00:37 4 Te 1/4
1329