Show Diag Information - Dell Z9500 Reference Manual

PASS
--------- Group Test Statistics ---------
Total
Passed
Failed
Elapsed time : 00H:00M:18S
Stop reason
------ Failed tests (level, times) ------

show diag information

Display the status of offline diagnostic tests on a switch.
Z9500
Syntax
show diag information
Defaults None.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.7.1.0
Usage
Use the show diag information command to view the progress of offline
Information
diagnostics on Z9500 CPUs: line-card processors (Linecard slots 0 to 2), Control
Processor (Linecard slot 3), and Route Processor (Linecard slot 4).
Example:
Dell# show diag information
Before offline
Diag information:
Diag software image version:
diagnostics are
9.5(0.1)
run on a switch
----------------------------
Offline).
Offline).
Debugging and Diagnostics
: 11
: 9
: 2
: after completion
qsfpOpticsTest (0, 1)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced the verbose option.
Introduced on the S-Series.
Linecard slot 0:
Linecard slot 1:
i2cTest (0, 1)
No card diags executed yet (Card
No card diags executed yet (Card
635