Capture Bgp-Pdu Max-Buffer-Size - Dell Z9500 Reference Manual

Version
9.2(1.0)
9.1(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.2.1.0
Usage
When you enable soft-reconfiguration for a neighbor and you execute the clear
Information
ip bgp soft in command, the update database stored in the router is replayed
and updates are re-evaluated. With this command, the replay and update process is
triggered only if route-refresh request is not negotiated with the peer. If the
request is indeed negotiated (after executing the clear ip bgp soft in
command), BGP sends a route-refresh request to the neighbor and receives all of
the peer's updates.
Related clear ip bgp
Commands

capture bgp-pdu max-buffer-size

Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Z9500
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-10240000
0
Defaults 40960000 bytes
Command
•
Modes
•
Command
Version
History
9.2(1.0)
8.2.1.0
7.5.1.0
Border Gateway Protocol
Description
Introduced on the Z9500.
Added support for IPv6.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— activates inbound policies without resetting the BGP TCP session.
Enter a size for the capture buffer.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
493