Show Ip Ospf Database Router - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

show ip ospf database

show ip ospf database router

Display the router (type 1) LSA information.

show ip ospf process-id database router [link-state-id] [adv-

router ip-address]

link-state-id

adv-router ip-

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Open Shortest Path First (OSPFv2 and OSPFv3)

Added support for Multi-Process OSPF.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

— displays OSPF database information.

Enter the OSPF Process ID to show a specific process. If no

Process ID is entered, command applies only to the first

OSPF process.

(OPTIONAL) Specify LSA ID in dotted decimal format. The

LSA ID value depends on the LSA type, and it can be one of

the following:

the network's IP address for Type 3 LSAs or Type 5 LSAs

the router's OSPF router ID for Type 1 LSAs or Type 4

the default destination (0.0.0.0) for Type 5 LSAs

(OPTIONAL) Enter the keywords adv-router followed by

the IP address of an Advertising Router to display only the

LSA information about that router.

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.