Show Ip Igmp Snooping Groups - Dell Z9500 Reference Manual

show ip igmp snooping groups

Display snooping related information for all the IGMP groups, interface or one group of one interface.
Z9500
Syntax
show ip igmp snooping groups [group-address [detail] | detail |
interface [group-address [detail]]]
Parameters
group-address
interface
detail
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage This command displays the IGMP database, including configured entries for either
Information all groups on all interfaces, all groups on specific interfaces, or specific groups on
specific interfaces.
The following describes the show ip igmp groups command shown in the
following example.
800
(OPTIONAL) Enter the group address in dotted decimal
format to view information on that group only.
(OPTIONAL) Enter the interface type and slot/port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
(OPTIONAL) Enter the keyword detail to display the
IGMPv3 source information.
EXEC
EXEC Privilege
Description
Introduced on the S4810, S4820T, S5000, S6000, Z9000,
and Z9500.
Internet Group Management Protocol (IGMP)