Dell Z9500 Reference Manual page 674

Hide thumbs Also See for Z9500:

Table of Contents

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The following example shows how to clear the discard counters globally:

Dell> clear ip dhcp snooping source-address-validation discard-

The following example shows how to clear the discard counters on an interface:

Dell> clear ip dhcp snooping source-address-validation discard-

counters interface TenGigE 1/10

The following example shows how to clear the discard counters on a port channel

Dell> clear ip dhcp snooping source-address-validation discard-

counters interface portchannel 1

show ip dhcp snooping

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

Introduced on the S6000-ON.

Added the keywords discard-counters, interface, and

the variable interface on the S4810, S4820T, S5000, S6000,

Z9000, Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the E-Series.

Introduced on the C-Series and S-Series.

— displays the contents of the DHCP binding table.

Dynamic Host Configuration Protocol (DHCP)