Hostname Dynamic; Ignore-Lsp-Errors - Dell Z9500 Reference Manual

hostname dynamic

Enables dynamic learning of hostnames from routers in the domain and allows the routers to advertise
the hostname in LSPs.
Z9500
Syntax
hostname dynamic
To disable this command, use the no hostname dynamic command.
Defaults Enabled.
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
Usage To build name-to-systemID mapping tables through the protocol, use this
Information command. All show commands that display systems also display the hostname.
Related clns host
Commands

ignore-lsp-errors

Ignore LSPs with bad checksums instead of purging those LSPs.
Z9500
Syntax
ignore-lsp-errors
To return to the default values, use the no ignore-lsp-errors command.
Defaults In IS-IS, the default deletes LSPs with internal checksum errors (no ignore-lsp-
errors).
Intermediate System to Intermediate System (IS-IS)
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
— defines a name-to-NSAP mapping.
1049