Show Ip Ospf Interface - Dell Z9500 Reference Manual

LS Seq Number: 0x80000016
Checksum: 0x987c
Length: 28
Network Mask: /24
LS age: 7
Options: (No TOS-capability, No DC, E)
LS type: Summary Network
Link State ID: 192.68.33.0
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000016
Checksum: 0x1241
Length: 28
Network Mask: /26
Related show ip ospf database
Commands

show ip ospf interface

Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no output is generated.
Z9500
Syntax
show ip ospf [process-id | vrf vrf-name] interface [interface]
Parameters
process-id
vrf vrf-name
interface
Command
•
Modes
•
1282
TOS: 0 Metric: 1
TOS: 0 Metric: 1
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Enter the keyword vrf followed by the name of the VRF to
show the OSPF processes that are tied to a specific VRF.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
• For a Null interface, enter the keyword null then the Null
interface number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
EXEC
EXEC Privilege
Open Shortest Path First (OSPFv2 and OSPFv3)