Distribute-List In - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The administrative distance indicates the trust value of incoming packets. A low

administrative distance indicates a high trust rate. A high value indicates a lower

trust rate. For example, a weight of 255 is interpreted that the routing information

source is not trustworthy and should be ignored.

distribute-list in

Filter network prefixes received in updates.

distribute-list prefix-list-name in [interface]

To return to the default values, use the no distribute-list prefix-list-

name in [interface] command.

prefix-list-

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Specify the prefix list to filter prefixes in routing updates.

(OPTIONAL) Identifies the interface type slot/port as one of

the following:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

Intermediate System to Intermediate System (IS-IS)