Dell Z9500 Reference Manual page 831

Version
9.7(0.0)
Version 9.0.2.0
Version 8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Usage
The following describes the interface command shown in the following
Information
example. This example sets a port as hybrid, makes the port a tagged member of
VLAN 20, and an untagged member of VLAN 10, which becomes the native VLAN
of the port. The port now accepts:
•
•
The following describes the do show interfaces command shown in the
following example. This example shows output with "Hybrid" as the newly added
value for 802.1QTagged. The options for this field are:
•
•
•
The following describes the interface vlan command shown in the following
example. This example shows unconfiguration of the hybrid port using the no
portmode hybrid command.
Example
Dell(conf)#interface tengigabitethernet 7/1
Dell(conf-if-gi-7/0)#portmode hybrid
Dell(conf-if-gi-7/0)#interface vlan 10
Dell(conf-if-vl-10)#untagged tengigabitethernet 7/1
Dell(conf-if-vl-10)#interface vlan 20
Dell(conf-if-vl-20)#tagged tengigabitethernet 7/1
Dell(conf-if-vl-20)#
Example
Dell(conf-if-vl-20)#do show interfaces switchport
Name: TenGigabitEthernet 7/1
802.1QTagged: Hybrid
Vlan membership:
Vlan
Native
Dell(conf-if-vl-20)#
Interfaces
Description
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
untagged frames and classify them as VLAN 10 frames
VLAN 20 tagged frames
True — port is tagged
False — port is untagged
Hybrid — port accepts both tagged and untagged frames
NOTE: Remove all other configurations on the port before you can remove
the hybrid configuration from the port.
10, Vlan 20
VlanId: 10
831