Dell Z9500 Reference Manual page 1082

level-1
level-2
local
detail
summary
lspid
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.2(0.2)
9.0.2.0
8.3.19.0
8.3.7.1
Usage The following describes the show isis database command shown in the
Information
following example.
Field
IS-IS Level-1/
Level-2 Link State
Database
LSPID
1082
(OPTIONAL) Displays the Level 1 IS-IS link-state database.
(OPTIONAL) Displays the Level 2 IS-IS link-state database.
(OPTIONAL) Displays local link-state database information.
(OPTIONAL) Detailed link-state database information of each
LSP displays when specified. If not specified, a summary
displays.
(OPTIONAL) Summary of link-state database information
displays when specified.
(OPTIONAL) Display only the specified LSP.
EXEC
EXEC Privilege
Description
Added supported for VRF. Introduced on the S6000-ON.
Introduced on the Z9000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Description
Displays the IS-IS link state database for Level 1 or Level 2.
Displays the LSP identifier.
The first six octets are the System ID of the originating
router.
The first six octets are the System ID of the originating
router. The next octet is the pseudonode ID. If this byte is
NOTE: If you do not specify this option, the IS-IS link
state database corresponding to the default VRF are
displayed.
Intermediate System to Intermediate System (IS-IS)