Show Hardware Forwarding-Table Mode - Dell Z9500 Reference Manual

Version
9.7(0.0)
Usage This command takes effect only after reboot.
Information
Related

show hardware forwarding-table mode

Commands mode in the current boot and in the next boot.
show hardware forwarding-table mode
Display the hardware forwarding table mode in the current boot and in the next boot.
Syntax
show hardware forwarding-table mode
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Example
Dell#show hardware forwarding-table mode
Settings
Mode
hosts
L2 MAC Entries
L3 Host Entries
L3 Route Entries
Dell#
Related hardware forwarding-table mode
Commands scalability size for L2 MAC table or L3 Host table or L3 Route table.
560
Description
Introduced on the S6000, S6000-ON, and Z9500 switch..
— displays the hardware forwarding table
Description
Introduced on the S6000, S6000-ON, and Z9500 switch.
Current Settings
: Default
: 160K
: 144K
: 16K
— selects the mode to initialize the maximum
Next Boot
scaled-l3-
96K
208K
16K
Content Addressable Memory (CAM)