Clear Qos Statistics - Dell Z9500 Reference Manual

Version
7.4.1.0
Usage
Packets arriving at the input interface are checked against the match criteria and
Information
configured using this command to determine if the packet belongs to that class.
This command accesses CLASS-MAP mode, where the configuration commands
include thematch ip and match mac options.
When you create a class map to filter protocol traffic for CoPP, you must enter the
keyword cpu-qos.
Related
ip access-list extended
Commands
ip access-list standard
match ip access-group
control list (ACL).
match ip precedence
match ip dscp
match mac access-group
the contents of the designated MAC ACL.
match mac dot1p
value.
match mac vlan
service-queue
show qos class-map

clear qos statistics

Clears Matched Packets through class maps applied to inbound ports
Z9500
Syntax
clear qos statistics interface-name
Parameters
interface-name
1446
Description
E-Series Only: Expanded to add support for Layer 2.
— configures an extended IP ACL.
— configures a standard IP ACL.
— configures the match criteria based on the access
— identifies the IP precedence values as match criteria.
— configures the match criteria based on the DSCP value.
— configures a match criterion for a class map based on
— configures a match criterion for a class map based on a dot1p
— configures a match criterion for a class map based on VLAN ID.
— assigns a class map and QoS policy to different queues.
— views the current class map information.
Enter one of the following keywords:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Quality of Service (QoS)