Ipv6 Dhcp Snooping Binding - Dell Z9500 Reference Manual

Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
8.3.1.0
7.8.1.0
Related show ip dhcp snooping
Commands

IPv6 DHCP Snooping Binding

Create a static DHCP snooping binding entry in the snooping database.
Syntax
[no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
ipv6 ipv6-address interface interface-type | interface-number
lease value
To delete the DHCP snooping binding entry from DHCP snooping database, use
the [no] ipv6 dhcp snooping binding mac address vlan-id vlan-id
ipv6 ipv6-address interface interface-type | interface-number
lease valuecommand.
Parameters
mac address
vlan-id
ipv6 ipv6-
address
interface type
700
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
— displays the contents of the DHCP binding table.
Enter the keyword mac then the MAC address of the host to
which the server is leasing the IPv6 address.
Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
Enter the keyword ipv6 then the IPv6 address that is leased
to the client.
Enter the keyword interface then the type of interface to
which the host is connected:
• For an 10/100 Ethernet interface, enter the keyword
fastethernet.
Dynamic Host Configuration Protocol (DHCP)