Show Ip Bgp Ipv6 Unicast Neighbors - Dell Z9500 Reference Manual

show ip bgp ipv6 unicast neighbors

Allows you to view the information exchanged by BGP neighbors.
Z9500
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length
| ip-address] [advertised-routes | dampened-routes | detail |
flap-statistics | routes]
Parameters
ipv6-address
prefix-length |
ip-address
advertised-
routes
dampened-
routes
detail
flap-statistics
routes
Command
•
Modes
•
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Related show ip bgp
Commands
546
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
(OPTIONAL) Enter the keywords advertised-routes to
view only the routes the neighbor sent.
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
(OPTIONAL) Enter the keyword detail to view neighbor-
specific internal information for the IPv6 address family.
(OPTIONAL) Enter the keywords flap-statistics to view
flap statistics on the neighbor's routes.
(OPTIONAL) Enter the keyword routes to view only the
neighbor's feasible routes.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
– view the current BGP routing table.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros or enter an IP address in dotted decimal
format to reset all prefixes from that neighbor.
Border Gateway Protocol