Show Config; Show Spanning-Tree Mst Configuration - Dell Z9500 Reference Manual

show config

View the current configuration for the mode. Only non-default values are shown.
Z9500
Syntax
show config
Command MULTIPLE SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.5.1.0
Example
Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
Dell(conf-mstp)#

show spanning-tree mst configuration

View the multiple spanning tree configuration.
Z9500
Syntax
show spanning-tree mst configuration
Command
•
Modes
•
Multiple Spanning Tree Protocol (MSTP)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
EXEC
EXEC Privilege
1207