Show Ntp Status - Dell PowerConnect W-7200 Series Reference Manual

show ntp status

show ntp status
Description
Show information for a NTP server.
Syntax
No parameters.
Example
The following example shows values for the primary NTP server.
(host) #show ntp status
system uptime:
time since reset:
bad stratum in packet:
old version packets:
new version packets:
unknown version number: 0
bad packet format:
packets processed:
bad authentication:
packets rejected:
system peer:
system peer mode:
leap indicator:
stratum:
precision:
root distance:
root dispersion:
reference ID:
reference time:
system flags:
jitter:
stability:
broadcastdelay:
authdelay:
The output of this command includes the following parameters:
Parameter
system uptime
time since reset
bad stratum in packet
old version packets
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
7594
7594
0
113
0
0
110
0
0
10.1.1.250
client
00
3
-18
0.03236 s
0.06728 s
[10.1.1.250]
cd45b701.bcbc05d5 Tue, Feb 17 2009 14:21:53.737
auth monitor ntp kernel stats
0.005020 s
0.866 ppm
0.003998 s
0.000000 s
Description
The number of seconds the local NTP server has been associated with the
switch.
The number of seconds since the last time the local NTP server was restarted.
The number of NTP packets with a corrupted stratum bit.
Number of packets that match the previous NTP version. A version number is in every
NTP packet.
show ntp status | 1171