Loading Media (Paper Or Marking Film); Loading Roll Media (Ce7000-40) - GRAPHTEC CE7000 Series User Manual

2.3

Loading Media (Paper or Marking Film)

Both roll media and sheet media can be used with the CE7000. Load the media according to the instructions given
for each type.
Use the grit roller on the right side of the media (looking from the front) as a guide when setting it in the media
sensor. Afterwards, adjust the push roller so that it's lined up with the side of the media.
•
Loading Roll Media
•
Loading Sheet Media

Loading roll media (CE7000-40)

Operation
1
Lower the media set lever to raise the push rollers.
2
Put the roll media on the roll media tray and then push the tip
of the roll media forward from the back of the machine. Make
sure to pull it so that there is no slackening across the roll
media's route.
Push roller
Media set lever
Media sensor
2-7