Operation Tray - GRAPHTEC FC 4500 Series Service Manual

6.16 Operation Tray

How to detach the Operation Tray
(1) Detach the Corner Cover 50L (See section 6.6.).
(2) Detach the Corner Cover 50R (See section 6.8.).
(3) Detach the Operation Panel (See section 6.15.).
(4) Remove the three M3L6 TP head screws holding the bottom of Operation Tray.
(The FC4500-60 and FC4510-60 has the four M3L6 TP head screws holding the bottom of Operation
Tray.)
(5) Remove the four M4L15 binding head screws holding the Rear Cover, and then detach it.
Operation Tray
How to install the Operation Tray
(1) Reattach the Operation Tray in the reverse order in which it was detached.
FC4500-UM-251-9370
M3L6 TP head screw
M4L15 binding head screw
28
6 REPLACEMENT PROCEDURES
Operation Tray
Operation Tray