Creating Test Pattern - GRAPHTEC CE6000-120AP User Manual

12.3

Creating Test Pattern

Create a self-test pattern to check the operation of the plotter.
CAUTION
Do not place your hand around the moving areas. The tool carriage will start moving, so there is a chance of injury. Tool carriage will
start to move immediately after selecting to plot the test pattern.
Operation
1
Set a media larger than A1 size.
2
Select the pen plunger condition setting and place the pen
plunger in the pen holder.
3
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
4
Press the POSITION ( ) key (TEST).
TEST menu screen (1/2) is displayed.
5
Press the [2] key (SELF TEST).
SELF TEST start screen is displayed.
Supplement
See "Loading Media (Paper)"
loading the media.
Supplement
Please choose Condition No.2 when
selecting the tool conditions for operating
with the pen plunger.
For setting the pen plunger, see "Attaching a
Tool"
For changing the tool conditions, see
"Selecting Tool Condition"
tool settings, see "Setting the Tool Condition"
Supplement
Perform the settings in Normal menu.
12-15
P.2-7
.
P.2-4
P.2-29
.
P.2-30
for
, and for