8
TROUBLESHOOTING
8.5.3
Printing the Test Pattern
Print a self-test pattern to check the operation of the plotter.
Operation
(1) Set a paper larger than A3 size.
(2) Set the pen tool to the tool carriage and select the condition where the pen tool is set.
(3) Press the [MENU] key to display the menu below.
(4) Press the POSITION (t) key (TEST) to display the menu below.
(5) Press the [2] key (SELF TEST) to display the menu below.
(6) Confirm that the pen tool is set.
(7) Press the [1] key (DONE) to print the test pattern.
(8) Turn the power off to stop the printing.
FC8600-UM-251-9370
17