Show Ip Mcast; Show Ip Mcast Boundary; Show Ip Mcast Interface - NETGEAR ProSafe GSM7224P User Manual

show ip mcast

This command displays the system-wide multicast information.
Format
show ip mcast
Modes
• Privileged EXEC
• User EXEC
Term Definition
Admin Mode
The administrative status of multicast. Possible values are enabled or disabled.
Protocol State
The current state of the multicast protocol. Possible values are Operational or
Non-Operational.
Table Max Size
The maximum number of entries allowed in the multicast table.
Protocol
The multicast protocol running on the router. Possible values are PIM-DM, PIM-SM, or
DVMRP.
Multicast
The number of entries in the multicast forwarding cache.
Forwarding
Cache Entry
Count

show ip mcast boundary

This command displays all the configured administrative scoped multicast boundaries.
Format
show ip mcast boundary {<unit/slot/port> | all}
Modes
• Privileged EXEC
• User EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes.
Group Ip
The group IP address.
Mask
The group IP mask.

show ip mcast interface

This command displays the multicast information for the specified interface.
Format
show ip mcast interface <unit/slot/port>
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
IP Multicast Commands
321