Cordless Dect Terminals - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

The Cordless DECT Terminals may be used with the UNIVERGE SV8100 KTS. The DTL-8R-1 TEL

uses 1.9 GHz DECT 6.0 FM Technology and is connected in tandem to a multiline terminal. The

ITL-8R-1 TEL uses 1.9 GHz DECT 6.0 FM Technology and is connected using the local network to the

SV8100 as a stand alone terminal. Refer to the ITL-8R-1 Cordless IP DECT Manual for more

information.

Press the applicable key on the Base Unit to Switch between Cordless operation and multiline terminal

Digital Technology

Silent Alarm

Dedicated Keys

Programmable Line Keys

Operational Range

Message Waiting Indication

Headset Connection

Determined by environmental conditions. These are cordless RF devices and, therefore, some interference may take place

when operating in the same environment as other wireless devices which operate within the same frequency spectrum.

If using the Base Switching option, Cordless DECT Terminal programmable keys:

1~4 can be set as a Programmable Function key such as Trunk Line Keys

5 and 6 can be set as One-Touch keys

7 and 8 are reserved for Base Switching and cannot be programmed

If the Base Switching option is not used, programmable keys 1~8 can be programmed as

Programmable Function Keys such as Trunk Line Keys.

The DTL-8R-1 Cordless DECT Terminals can be used in conjunction with the UNIVERGE

SV8100, and DTL Digital Multiline Telephones.

Cordless DECT Terminals

(DTL-8R-1 and ITL-8R-1)

2-line, 24-digit LCD Display

TALK, TRANSFER, HOLD, CONF, SPEAKER, REDIAL, MUTE, R/VOL

50~150 feet (expandable with repeaters)

5 channels by 12 time slots