Cordless Dect Terminals - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

With Version 4000 or higher software, a Flash (Recall) key can be placed on a line key.

With Version 4000 or higher software, the door strike relay can be activated from the MH240 or

Cordless DECT terminal by a Flash Key assigned to a line key in Program 15-07 (751: 62).

The Cordless DECT Terminals may be used with the UNIVERGE SV8100 KTS. The DTL-8R-1 TEL

uses 1.9 GHz DECT 6.0 FM Technology and is connected in tandem to a multiline terminal. The

ITL-8R-1 TEL uses 1.9 GHz DECT 6.0 FM Technology and is connected using the local network to the

SV8100 as a stand alone terminal. Refer to the ITL-8R-1 Cordless IP DECT Manual for more

information.

Press the applicable key on the Base Unit to Switch between Cordless operation and multiline terminal

Digital Technology

Silent Alarm

Dedicated Keys

Programmable Line Keys

Operational Range

Message Waiting Indication

Headset Connection

Determined by environmental conditions. These are cordless RF devices and, therefore, some interference may take place

when operating in the same environment as other wireless devices which operate within the same frequency spectrum.

Cordless DECT Terminals

(DTL-8R-1 and ITL-8R-1)

2-line, 24-digit LCD Display

TALK, TRANSFER, HOLD, CONF, SPEAKER, REDIAL, MUTE, R/VOL

50~150 feet (expandable with repeaters)

5 channels by 12 time slots

Show Quick Links

Table of Contents