Controller Specifications - Gestetner A193 Service Manual

1.2 CONTROLLER SPECIFICATIONS

Item
Resolution
Smoothing
Toner Saving Mode
RAM Capacity
Emulation
Resident Fonts
Paper Size
Host Interface
Printer Controller
Optional Units
(A643)
300 x 300 dpi, 600 x 600 dpi (selectable)
Yes
Yes
2 MB (Standard)
4 MB (with optional printer enhancement unit)
2 SIMM Slots for 1/2/4/8/16 MB
Printer Controller:
PCL 5e (LaserJet 4M+)
Printer Enhancement Unit (option):
PostScript Level 2 (LaserJet 4M+)
Printer Controller:
35 Intellifont fonts
10 True Type fonts
1 Bitmap font
Printer Enhancement Unit (option):
35 Type 1 fonts
Available from paper cassette:
11" x 17" (L), 8 1/2" x 14" (L), 8 1/2" x 11" (L/S), Executive (L/S),
A3 (L), B4 (L), A4 (L/S), B5 (L/S), A5 (S), Folio (L), Foolscap (L),
F (L), Free Size (W: 182 - 297 mm/7.2 - 11.7", L: 148 - 432 mm/5.8 -
17")
Available from bypass tray:
11" x 17" (L), 8 1/2" x 14" (L), 8 1/2" x 11" (L), 5 1/2" x 8 1/2" (L),
Executive (L), A3 (L), B4 (L), A4 (L), B5 (L), A5 (L), Folio (L), Foolscap
(L), F (L), Postcard (L), Double Postcard (L), Com 10Env
(L),MonarchEnv (L), B5 Env (L), C5 Env (L), C6Env (L), DLEnv (L),
Free Size (W: 90 - 297 mm/3.5-11.7", L: 148 - 432 mm/5.8 - 17")
Available from duplex tray:
11" x 17" (L), 8 1/2" x 14" (L), 8 1/2" x 11" (L/S), Executive (L/S), A3
(L), B4 (L), A4 (L), B5 (L/S), A5 (S), Folio (L), Foolscap (L), F (L)
Note: Duplex printing is not available if the bypass tray is selected.
Printer Controller:
Bi-Centronics Parallel Interface x1
RS-232C Serial Interface x1
Printer Enhancement Unit (option):
Local Talk Interface x1
Printer Enhancement Unit
Hard Disk Drive (540 MB 2.5" IDE)
Etnernet, Token Ring (IPX/SPX, TCP/IP)
1-2
Specifications
SM