Gestetner A193 Service Manual page 206

2.2.6 Original Jam History Display (SP7-905)
After entering the SP mode, select "1" and press the
message will be displayed.
1
6
1: Jam history no. 2: Main motor operating date
5: Second 6: Jam code (see the table below)
Jam Code
210 Registration sensor not activated.
211 The registration sensor remained activated by paper.
NOTE: The NVRAM can store data for up to 10 original jams. If more than
10 original jams occur, the oldest data will be erased.
2.2.7 System Parameter And Data Lists (SP5-992)
1. Access SP mode 5-992 and select the number corresponding to the list
that you wish to print.
2. Press the Interrupt key on the operation panel to access the copy mode
display.
3. Select the paper size.
4. Press the Start key on the operation panel to print the list.
5. After printing the list, exit copy mode by pressing the Interrupt key on the
operation panel.
ö
6. Press the key three times to exit the SP mode.
SM
2 3 4
5
A193M510.wmf
7
Meaning
4-39
SERVICE PROGRAM MODE
ù
key. The following
3: Hour 4: Minute
7: Original size
(A193)