User Level Programming - Gestetner A193 Service Manual

INSTALLATION PROCEDURE
1. INSTALLATION PROCEDURE
Install the hardware as described in Chapter 3 of the host fax machine's
service manual. Then program the following items.

1.1 USER LEVEL PROGRAMMING

The following items can be programmed with user function 61. Make sure
that the items are programmed correctly.
Item
Own analog number
Own ISDN-G4 number
Own ISDN-G3 number
Polling ID
Confidential ID
Memory lock ID
RTI
TTI
G4_TID (Terminal ID)
CSI
IG3_CSI (ISDN G3 CSI)
(A644) ISDN
ISDN PSTN
G4 G3 G3
4 Used for transfer operations in PSTN
G3 communication
4 Used for transfer operations in ISDN
G4 communication.
4
Used for transfer operations in ISDN
G3 communicaiton.
4 4 4
Used for secured polling, transfer
operations, and closed network.
4 4 4 Used for confidential reception.
Optional SAF memory required.
4 4 4 Used for memory lock. Optional SAF
memory required.
4 4
Used to identify the terminal in G3
NSF/NSS communications.
4 4 Printed on each transmitted page in
G3 communicaitons.
4 Used to identify the terminal in G4
communications.
4 Used to identify the terminal in G3
DIS/DCS communications over
PSTN.
4
Used to identify the terminal in G3
communications over an ISDN.
1-1
Remarks
SM