Gestetner A193 Service Manual page 455

Mode No.
Class
Class 3
1 and 2
Side-to-Side
Registration
(3rd paper
3
feed: Option
PFU tray 1)
Side-to-Side
Registration
(4th paper
4
feed: Option
PFU tray 2)
Side-to-Side
1-002 *
Registration
(By-pass feed)
5
Side-to-Side
Registration
(Duplex)
6
Side-to-Side
Registration
7 ## (LCT)
Paper Feed
Timing
1
(Paper Feed
Trays)
Paper Feed
1-003 *
2 Timing
(By-pass)
Paper Feed
3 ## Timing
(LCT)
Double copy
registration
1-006 *
By-pass Feed
1-007 * Paper Size
Display
SM
SERVICE PROGRAM MODE TABLE
Function
Adjusts the printing side-to-side
registration from the 3rd paper feed
station using the Trimming Area Pattern
(SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm.
Adjusts the printing side-to-side
registration from the 4th paper feed
station using the Trimming Area Pattern
(SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm.
Adjusts the printing side-to-side
registration from the by-pass feed table
using the Trimming Area Pattern
(SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm.
Adjusts the printing side-to-side
registration from the duplex tray using the
Trimming Area Pattern (SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm.
Adjusts the printing side-to-side
registration from the LCT using the
Trimming Area Pattern (SP5-902, No.10).
Use the •/∗ key to toggle between + and -.
The specification is 2 ± 1.5 mm.
Adjusts the relay clutch timing (or
transport motor timing when using the
LCT) at registration. The relay clutch
timing (transport motor timing) determines
the amount of paper buckle at
registration. (A larger setting leads to
more buckling.)
Adjusts the position of the second copy
from the center line in double copy mode.
Use the •/∗ key to toggle between + and -.
See "Replacement and Adjustment -
Copy Image Adjustments" for details.
Displays the paper width sensor data for
the by-pass feed table.
13-21
Settings
+9 ~ -9
1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
+9 ~ -9
0.1 mm/step
+ 0.0 mm
0 ~ 10
1 mm/step
7 mm
0 ~ 10
1 mm/step
8 mm
0 ~ 10
1 mm/step
7 mm
+9 ~ -9
1 mm/step
+ 0 mm
A224