Gestetner A193 Service Manual page 178

Mode No.
Class
Class 3
1 and 2
Leading Edge
Margin
1
(Scanning)
Trailing Edge
2 Margin
4-012 *
(Scanning)
Left Side
3 Margin
(Scanning)
Right Side
4 Margin
(Scanning)
Scanner Free
Run
4-013
White Plate
Scanning
1
Start Position
White Plate
4-015*
Scanning
Area
2
Sub Scan
Magnification
(Scanning:
4-101* Book Mode)
APS Sensor
check
4-301
SM
Function
Adjusts the leading edge margin for
scanning.
Do not adjust this unless the user wishes
to have a scanner margin that is greater
than the printer margin.
Adjusts the trailing edge margin for
scanning.
See the comment for SP 4-012-1.
Adjusts the left side margin for scanning.
See the comment for SP 4-012-1.
Adjusts the right side margin for scanning. 0.0 ~ 9.0
See the comment for SP 4-012-1.
Performs a scanner free run with the
exposure lamp on.
After selecting "1", press Enter or
twice to start this feature. Press
stop.
Adjusts the scanning start position on the
white plate for auto shading.
The default is 6 mm from the leading
edge. The setting specifies how far
scanning starts from the default position.
Adjusts the width of the area on the white
plate (in the sub scan direction) that is
scanned for auto shading.
The default is 5 mm (for 41 - 400%
reproduction ratios) or 6.5 mm (25 - 40%).
The current setting specifies the
difference from these defaults.
Adjusts the magnification in the sub scan
direction for scanning.
If this value is changed, the scanner
motor speed is changed.
Use the •/∗ key to toggle between + and -.
See "Replacement and Adjustment -
Copy Image Adjustments" for details.
Displays the status of the APS sensors
and platen/DF cover sensor.
See "APS and Platen/DF Sensor Output
Display" after the SP mode table.
4-13
SERVICE PROGRAM MODE
Settings
0.0 ~ 9.0
0.1 mm/step
1.0 mm
0.0 ~ 9.0
0.1 mm/step
1.0 mm
0.0 ~ 9.0
0.1 mm/step
1.0 mm
0.1 mm/step
1.0 mm
0: No
1: Yes
ù
õ
to
- 3.0 ~ + 6.0
0.5 mm/step
0 mm
- 3.0 ~ + 6.0
0.5 mm/step
0 mm
- 1.0 ~ + 1.0
0.5 %/step
+ 0.0 %
(A193)