Image Rotation Before Transmission - Gestetner A193 Service Manual

6. IMAGE ROTATION BEFORE TRANSMISSION

Sub Scan
(< 210mm/8.5")
Original
Sub Scan
(< 210mm/8.5")
Original
This function avoids the unintentional reduction of an A3 or 11" width original.
When the machine detects an A4 or 8.5 x 11" original placed sideways in the
ADF or on the exposure glass, the fax unit rotates the scanned image
clockwise by 90 degrees before transmission, as shown above.
Notes The orientations of the transmitted image from the ADF and
•
from the exposure glass are different.
Even if Parallel Memory Transmission is enabled, the
•
machine uses normal memory transmission to send an A4 or
8.5 x 11" sideways original.
If the machine carries out this function while printing, the
•
machine stops printing until scanning is completed.
Cross Reference
Image rotation before tx on/off - Scanner switch 0F, bit 0
(A639)
IMAGE ROTATION BEFORE TRANSMISSION
DF Mode
1st Pixel
Scanned Image
Book Mode
1st Pixel
Scanned Image
2-11
Transmitted Image
Transmitted Image
A194D503.wmf
SM