Overall Electrical Circuit - Gestetner A193 Service Manual

DETAILED DESCRIPTIONS

5.4 OVERALL ELECTRICAL CIRCUIT

Copier IOCSS
Duplex Tray
Board
Duplex Control Board
Motors
Duplex Tray
Connection
Sensors
Solenoid and
Sensor
Inverter Unit
A694O502.wmf
The solenoid and sensor in the inverter unit are directly connected to the
copier. The motors and sensors in the duplex tray are controlled by the
duplex control board.
When the duplex tray connector is connected (this happens when the duplex
tray is slid into the machine), the duplex tray connection signal to the copier is
grounded. Then the copier detects that the duplex tray has been inserted.
(G694) 9-16 SM