REPLACEMENT AND ADJUSTMENT
6. REPLACEMENT AND ADJUSTMENT
6.1 EXTERIOR REMOVAL
[A]
[H]
[J]
[C]
1. Remove the shift tray [A] (1 snap ring).
NOTE :The shift tray cannot be removed if the tray is at its uppermost
position.
2. Remove the rear cover [B] (3 screws).
3. Remove the front cover [C] (2 screws).
4. Remove the front inner cover [D] (3 screws).
5. Remove the upper cover [E] (2 screws).
6. Remove the rear upper cover [F] (1 screw).
7. Remove the upper entrance cover [G] (2 screws).
8. Remove the front and rear tray covers [H,I] (2 screws)
9. Remove the left cover [J](2 screws).
SM
[I]
[D]
12-24
[E]
[F]
[B]
[G]
(A666)