Gestetner A193 Service Manual page 633

System Switch 1F
No FUNCTION
0 Not used
to
2
3 Received fax print start timing
(G3 reception)
0: After receiving each page
1: After receiving all pages
4 Received fax print start timing
(G4 reception)
0: After receiving each page
1: After receiving all pages
5 Not used
6
7 Action when a fax SC has
occurred
0: Automatic reset
1: SC code display
(A639)
COMMENTS
Do not change the settings.
0: The machine prints each page immediately after the
machine receives it.
1: The machine prints the complete message after the
machine receives all the pages in the memory.
Do not change the factory settings.
0: When the fax unit detects a fax SC code other than
SC1201 and SC1701, the fax unit automatically resets
itself.
1: When the fax unit detects any fax SC code, the fax
unit displays the SC code and stops.
Cross Reference
Fax SC codes - See "Troubleshooting"
4-29
BIT SWITCHES
SM