Gestetner A193 Service Manual page 631

System Switch 12
No FUNCTION
0 TTI/CIL printing position in
to the main scan direction
7
CIL: Command Information
Line (Group 4)
System Switch 13 - Not used (do not change the settings)
System Switch 14 - Not used (do not change the settings)
System Switch 15 - Not used (do not change the settings)
System Switch 16 - Not used (do not change the settings)
System Switch 17 - Not used (do not change the settings)
System Switch 18 - Not used (do not change the settings)
System Switch 19 - Not used (do not change the settings)
System Switch 1A - Not used (do not change the settings)
System Switch 1B - Not used (do not change the settings)
System Switch 1C - Not used (do not change the settings)
System Switch 1D - Not used (do not change the settings)
System Switch 1E
No FUNCTION
0 Communication after the
TCR (Journal) data storage
area has become full
0: Possible
1: Impossible
1 Action when the SAF
memory has become full
while scanning
0: The page is erased.
1: The file is erased.
2 RTI/CSI display priority
0: RTI 1: CSI
(A639)
COMMENTS
08 to 92 (BCD) mm. Input even numbers only.
This setting determines the print start position for the
TTI and CIL from the left edge of the paper. If the TTI is
moved too far to the right, it may interfere with the file
number which is on the top right of the page. On an A4
page, if the CIL is moved over by more than 60 mm, it
may overwrite the page number.
COMMENTS
0: If the buffer memory of the communication records
for the TCR (Journal) has become full, fax
communications are still possible. But the the machine
will overwrite the communication records from the oldest.
1: If the buffer memory of the communication records
for the TCR (Journal) has become full, fax
communications will become impossible, in order not to
overwrite the communication records before the
machine prints them out.
Number of communication records for TCR (Journal):
256 records (without function upgrade card)
1000 records (with function upgrade card)
0: If the SAF memory becomes full while scanning, the
successfully scanned pages are transmitted.
1: If the SAF memory becomes full while scanning, the
file is erased and no pages are transmitted.
This bit determines which identifier, RTI or CSI, is
displayed on the LCD while the machine is
communicating in G3 non-standard mode.
4-27
BIT SWITCHES
SM