System Parameter Lists (Function) - Gestetner A193 Service Manual

SERVICE LEVEL FUNCTIONS
To increment the bit switch
number: press '↓ Switch'.
To decrement the bit switch
number: press '↑ Switch'.
Example:
To display bit switch 03: Press
'↓ Switch' 3 times.
3. Adjust the bit switch.
Example:
To change the value of bit 7, press 7.
4. To adjust more bit switches, go to step 2.
To finish, press 'OK' then press 'User
Tools'.
5. Exit the service mode.
NOTE: After changing any of the G4 bit switches, be sure to turn both of the
ac switches off and back on, so that the new settings become
effective.
1.3 SYSTEM PARAMETER LISTS (FUNCTION 02)
1. Enter the fax service mode.
 
2. Press
3. Press one of the following numbers, as

required:
G3 system parameter list

–
G4 system parameter list
–
NOTE: An optional G4 interface is required to print the G4 system
parameter list.

4. Press
5. Exit the service mode.
SM 4-2
A194M503.img
A194M504.img
A194M505.img
(A639)