Gestetner A193 Service Manual page 341

4. The second sheet [B] starts again when
the trailing edge of the first sheet [A]
passes through the duplex exit sensor
[D], and it is reversed. The second sheet
is being reversed, the third sheet [E] is
fed out from the lower tray after the first
sheet has reached the registration roller.
5. The first sheet [A] is fed out to the copy
tray. The second sheet [B] is fed out from
the duplex tray. The third sheet [E] is
transported to the duplex tray.
6. The second sheet [B] is transported to
the exit section. The third sheet [E] is
reversed. While the third sheet is being
reversed, the fourth sheet [F] is fed out
from the lower tray after the second
sheet [B] has reached the registration
roller.
SM
[A]
[B]
[A]
2
1
[E]
9-9
BASIC OPERATION
[E]
1
2
[D]
4
G694O513.wmf
6
[B]
4
G694O514.wmf
[B]
3
4
[F]
6
G694O515.wmf
[E]
(G694)