Drum Charge Roller Unit - Gestetner A193 Service Manual

PHOTOCONDUCTOR UNIT (PCU)

2.2 DRUM CHARGE ROLLER UNIT

[B]
1. Remove the upper cover [A] of the PCU (6 hooks 1 connector).
2. Remove the drum charge roller unit [B].
NOTE: 1. Do not let the springs fall. Do not remove the drum charge
roller from the case when cleaning or replacing.
2. Never touch the surface of the drum charge roller.
3. If there is any dirt on the surface of the drum charge roller,
wipe it off with a dry cloth or a special cloth for the drum
charge roller. (The special cloth is available as a service part:
A1539004.) Never use alcohol or water to clean the drum
charge roller.
(A193)
[A]
5-6
A193R525.wmf
SM