Gestetner A193 Service Manual page 398

REPLACEMENT AND ADJUSTMENT
5.10 REGISTRATION SENSOR REPLACEMENT
[D]
[E]
1. Remove the front and rear cover.
2. Remove the original feed unit [A].
3. Remove the DF feed cover [B] (1 screw).
4. Remove the upper transport guide [C] (2 screws).
5. Remove the lower transport guide [D] (2 screws).
6. Remove the idle roller unit [E] (4 screws).
7. Remove the original exposure guide [F] (1 screw).
8. Replace the registration sensor [G] (1 screw, 1 connector).
(A661)
[F]
[G]
[B]
[A]
11-32
[C]
SM