Table of Contents
Advertisement
17. US only: If the optional handset needs
to be installed, use the bracket and
screws which are enclosed with the fax
unit.
18. In European countries where the usage
of the RJ11 type 'TEL' jack is prohibited
by the local PTT, use the plug [X] in the
'TEL' jack as shown.
•
NOTE:
Be sure to set the clock (date
and time).
•
Program the serial number into the fax unit (service function 10).
The serial number can be found on the serial number label (which
has been attached to the machine in step 12).
3.1 INITIAL PROGRAMMING
Key-operator Level
Clock
Transmit mode
Resolution
Photo original
Reception mode
Auto image density
ID code
ECM
Volume
TTI / RTI
Economy transmission
G3 setting (Analog line)
(Line type/CSI/Own number)
User parameters
SM
[X]
Key-operator mode 19
Initial setup (Transmit)
Initial setup (Transmit)
Initial setup (Transmit)
Initial setup (Receive)
Initial setup (Receive)
Key-operator mode 01
Key-operator mode 02
Key-operator mode 09
Key-operator mode 11
Key-operator mode 12
Key-operator mode 14
Key-operator mode 17
7-19
INSTALLATION
A804I524.wmf
(A804)
Advertisement
Chapters
Table of Contents
