Gestetner A193 Service Manual page 190

Rev. 6/13/97
Mode No.
Class
Class 3
1 and 2
⇒
ADF/ARDF
1 Side-to Side
Registration
ADF/ARDF
6-006 *
2 Leading Edge
Registration
ADF/ARDF
3 Trailing Erase
Margin
ADF/ARDF
⇒
Sub-scan
6-007* Magnification
⇒
ADF/ARDF
Free Run
6-009
Stamp
6-010* Position
Adjustment
ARDF/ADF
⇒
Original
6-901
Sensor Output
Display
ADF/ARDF
⇒
Original
6-902*
Scanning
Method
Original
Non-waiting
Start
6-903*
Original
Scanning
6-904*
Interval
⇒
ARDF Skew
6-905* Correction
ARDF Original
Curl
6-906* Adjustment
SM
Function
Adjusts the printing side-to-side
registration in the DF mode.
Use the •/∗ key to toggle between + and -.
Adjusts the leading edge registration in
the DF mode.
Use the •/∗ key to toggle between + and -.
Adjusts the trailing edge erase margin in
DF mode.
Use the •/∗ key to toggle between + and -.
Adjusts the magnification in the sub-scan
direction for DF mode.
Use the •/∗ key to toggle between + and -.
See "Replacement and Adjustment -
Copy Image Adjustments" for details.
Performs an DF free run.
To perform the free run, press 1 then
ù õ
press twice. Press
Adjusts the stamp position in the
sub-scan direction in facsimile mode.
Displays the status of the original sensor
for the ADF and paper size.
See "DF APS Original Sensor Output
Display" after the SP mode table.
Selects the original scanning method in
DF mode.
Selects whether the original non-waiting
start is performed or not.
If the user often feeds originals that slip,
and the leading edge is catching up with
the trailing edge of the previous page, set
this SP mode to "0" .
Adjusts the interval between originals in
original non-waiting start mode.
This SP mode is only effective when SP
6-903 is set at "1".
Selects whether the skew correction is
done or not when the ARDF feeds the
rear side of the original.
Adjusts the amount of original at the
ARDF registration roller when the ARDF
feeds the rear side of the original.
This SP mode is only effective when SP
6-905 is at "0."
4-23
SERVICE PROGRAM MODE
Settings
-1.5 ~ +1.5
0.5 mm/step
+ 0.0 mm
-10 ~ +10
0.5 mm/step
+ 6.0 mm
-3.0 ~ +3.0
0.1 mm/step
+ 0.0 mm
- 4.0 ~ + 4.0
0.1 %/step
0.0 %
0: No
1: Yes
to stop.
- 10 ~ + 10
1 mm/step
0 mm
0: Original
1: Copy paper
size +
magnification
0: No
1: Yes
30 ~ 50
1 mm/step
40 mm
0: No
1: Yes
10 ~ 40
1 mm/step
15 mm
(A193)