Gestetner A193 Service Manual page 579

9. TWO-SIDED (DUPLEX) PRINTING
When two-sided printing is enabled in fax mode, the machine prints two
consecutive pages, which must be the same size and direction, onto both
sides of the page.
As shown in the above diagram, the print results look different depending on
the direction of the paper selected. When the machine selects a lengthwise
(in paper feed direction) paper for printing, the back side of the paper is
printed upside down.
To prevent this, carefully choose paper feed stations which the machine can
print fax messages from using the Printer Switch 02.
Notes:
The optional duplex unit and SAF memory are required to
•
enable two-sided printing.
The machine starts printing after all pages have been
•
received.
Cross Reference
Duplex printing on/off for specific senders - Key operator mode 06
Duplex printing on/off for all received fax messages - Printer Switch 0F, bit 2
Wait time when duplex unit is in use - Printer Switch 0F, bits 6 and 7
Paper feed station selection for fax printing - Printer Switch 02, bits 0 to 3
(A639)
TWO-SIDED (DUPLEX) PRINTING
Sideways
Lengthwise
Black - Front Side
Gray - Back Side
2-25
A194D517.wmf
SM